Articles

For a Healthier, Happier You

Before the protocol

Preparing for our mold and metal tests: two weeks, day by day.

Two tests. Fifteen days of prep. One of the hardest weeks my wife has had.

Before starting the protocol, we tested for mold toxins and heavy metals. Each test has its own rules, and they run back to back. This is what we did, day by day.

The testsRealTime Labs urine mycotoxinsDoctor's Data urine metals, before and after a DMSA challenge
What it isn'tMedical advice. It's what we did.
How long15 days
Two articles, one path

Where this fits in what we did

Step 1 · Test
Preparing for our mold and metal tests This article
Step 2 · Learn
The results We started the basic protocol right after testing, then fine-tuned it when the results came in. The dust test had already shown us which molds were in the house, though not their toxins. That was enough to start our basic protocol.
Step 3 · The protocol
Our family's mold protocol
Read it →

Binders pause for 4 days before the mycotoxin sample. That's why testing comes first.

Why test first

We tested first for two reasons. It gave us a starting line, and it told us what we were actually carrying, which guided what we took. And the mycotoxin test needs four days without binders, the heart of the protocol, so testing had to come first.

Our two weeks, at a glance

Took
Glutathione, twice a dayGlutathione
Usual routineUsual
Skipped (supplements)
No bindersBinders
No extrasExtras
Skipped (food)
High-mold foodsMold
No fish, shellfish or riceFish, shellfish, rice
Tests

Week 1 · Mycotoxin test

From the RealTime Labs sheet

Week 1
It was a hard week.

Seven days of glutathione with no binders. My wife felt terrible the whole time, maybe the worst since the mold made her sick (glutathione loosens toxins; with binders paused, less gets caught on the way out). Next time, we'd clear the calendar.

  1. 1Days 1–7
    Glutathione, twice a day: phytosomal from Costco at first (we could get it the same day), then Quicksilver liposomal (glutathione is thought to help the body release stored mycotoxins into urine, which is why the lab asks for it before the test)
  2. 2Days 4–8
    No binders until after the sample (charcoal, chlorella, bentonite clay, zeolite, Ultra Binder) (so binders don't hold back what the test is looking for)
  3. 3Days 5–7
    No high-mold foods: all grains, dried fruit, aged cheese, mushrooms, coffee (Purity coffee is OK), beer, wine, lunch meat and other processed meat, fermented foods. This was the hard part, since nuts, dried fruit and whole grains are staples for us. Coffee was harder still: those three mornings felt longer than the whole two weeks.
  4. 4Day 7 evening
    Our cedar sauna, 30 minutes, with a short break halfway, at 15 (sweating the evening before is thought to raise what shows up in the morning sample)
  5. 5Day 8
    Test 1: collected the first urine of the morning. RealTime Labs' own collection sheet came in the kit.
  6. 6Days 8–15
    No fish, shellfish or rice: the first step toward the heavy-metal test on day 15 (seafood and rice can carry arsenic, and seafood mercury, which would show up in the results)

A urine test shows what the body is clearing, not how much mold was in the house. We read ours beside our symptoms and our dust tests.

Week 2 · Heavy-metal challenge

From Doctor's Data's instructions

Food, week 2: Doctor's Data asks only for no fish or shellfish, for the week before the challenge.

  1. 7Days 9–12
    Back to our usual routine, still without fish or shellfish.
  2. 8Days 13–15
    No non-essential supplements or medications, multi-minerals included, for the 48 hours before and during the collection. We hydrated well (the lab asks for good hydration before the challenge)
  3. 9Day 15
    Test, Challenge, Test
    1. Before Test: collected the first urine of the morning in the separate “before” kit.
    2. DMSA Challenge: took the DMSA on an empty bladder and an empty stomach (the dose was set for us) (DMSA is a sulfur-based chelator: a drug that grabs metals so the kidneys can pass them).
    3. After Test: collected all urine for the next 6 hours, sipping purified water the whole time: about a liter, maybe more. No food for 2 hours after the DMSA. Gas, bloating or loose stools are common, and usually pass within the 6 hours.
    Each result told us something, and so did the difference between them (the “before” sample is thought to show what the body clears on an ordinary day, and the rise after DMSA what may be stored).

The clinic set the DMSA dose and checked kidney function first.

The lab sheets also cover methylene blue, MRI contrast dye and periods.

Doctor's Data itself says there are no established reference ranges for provoked tests. We treated ours as one clue, not a verdict.

The test that mattered most wasn't a urine test

We also tested the dust in two buildings: our home and my wife's workplace.

Our homeERMI: 25.6HERTSMI-2: 34The lab's highest band
The workplaceERMI: 8.3HERTSMI-2: 12Still in the top quarter of US buildings

Once we saw that HERTSMI-2 score, we left the house within the hour. Twelve hours later, my wife felt dramatically better.

Getting out of that house mattered ten times more than anything else we did.

No test, supplement or binder comes close. That's where our protocol starts: step zero, we left. Everything after it, piece by piece, is in the next article.

Read our family's mold protocol

Pick your own path to discuss with your doctor.

The products we use

Everything named above, in one place, so it's easy to find. These are the brands we use, not the only good ones. We have no ties to any of them.

PhotoProductBrandWhere it's usedLink
The push
Liposomal Glutathione Quicksilver Scientific Days 1–7, twice a day Brand's page →
Tests
Mycotoxin Panel (urine) RealTime Laboratories Day 8, test 1 Brand's page →
Urine Toxic Metals Doctor's Data Day 15, test 2 (challenge day) Brand's page →